Voltage Supply For The Module - Fagor PPC-21W Series Manual

2.5
2.
CNCelite
8060 8065
8070
R . 2106
EF
ꞏ36ꞏ

Voltage supply for the module.

The monitor and the panel PC require separate power supplies; it is necessary to power both
modules.
(A)Monitor power: 24 V DC (recommended).
(B)Monitor power: 12 V DC (consult Fagor Automation).
(C)Panel PC power: 24 V DC.
The monitor has two different voltage power supply ports (24 and 12 V DC). Fagor
Automation recommends using 24 V DC (Phoenix-type connector) to power the monitor.
Consult Fagor Automation before using the 12 V DC option (DC jack connector).
Both monitor power suppliers (24 and 12 V DC) must never be connected at the same time.
Monitor power: 24 V DC.
Power the monitor with a 24 V DC ±10 % 1.5 A power supply.
1
Panel PC power: 24 V DC.
Power the panel PC with a 24 V DC ±20% 1.5 A power supply.
1
Power supply cable characteristics.
Use generic 12 AWG (4 mm²) to 18 AWG (1 mm²) cable.
Consumption.
Consumption: 55 W (typical), 100 W (max.).
A B
Pin Signal. Function.
1 - - -.
2 11 0 V reference signal.
3 +24 V Power supply.
Pin Signal. Function.
1 Ground.
2 – 0 V reference signal.
3 + Power supply.
P a n e l P C .
C