Pre-Installation And Application Warnings; Installation; Wiring Diagram With T-Harness (Thchd3) - Directed DB3 Installation Manual

Pre-installation and application warnings

Firmware notes: This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
The optional Plug & Play THCHD3 T-Harness is sold separately.
Š
The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.
Š
Key2GO is mandatory to control the immobilizer override in this firmware.
Š
The keyless entry control on the OEM Key FOB used during Key2Go programming will not work while the vehicle is remote
Š
started.
Š
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic
Š
connector.
Refer to "Vehicle connections" following the wiring diagram.
Š
General notes: This section highlights important information for this specific firmware.
Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
[1]
HS CAN 2 connections are required for heated seats.
[2]
5
THCHD3 Keys required for 1 Keys required for
programming operation
403.CHRYSLER6 2.04 2016 Dodge/Ram 1500
© 2018-01-30 Directed. All rights reserved.
0