Locating Components In The Vehicle - Directed DB3 Installation Manual
For dodge ram 1500 2016; 403.chrysler6 2.04 all-in-one door lock & override module
Hide thumbs
Also See for DB3:
- Installation manual (25 pages) ,
- Manual (6 pages) ,
- Installation manual (21 pages)
Need help?
Do you have a question about the DB3 and is the answer not in the manual?
Questions and answers
Installing on a 2006 gmc sierra
To install the Directed DB3 on a 2006 GMC Sierra:
1. Use a professional installer: The product is intended for installation by trained professionals only.
2. Use the correct wiring: Follow the wiring diagram specific to the vehicle. If using a T-Harness (model THCHD3), refer to the T-Harness wiring diagram.
3. Locate components: Identify and access the necessary vehicle components for connection using the guide provided.
4. Connect the module: Make all wire connections as shown in the wiring diagram. Ensure secure and proper connections to avoid electrical system damage.
5. Program the module: Follow the module programming steps to initialize and configure the DB3 for the 2006 GMC Sierra.
6. Test the system: Use the LED diagnostics and troubleshooting section to verify proper operation and resolve any errors.
7. Perform reset or feature programming if needed: Use soft/hard reset or feature programming steps based on installation results.
Professional installation is strongly recommended to prevent vehicle damage.
This answer is automatically generated