Connecting To A Computer - Usb 3.0; Select Device - Yamaha CS-700 Operation Manual

Connecting to a Computer – USB 3.0
Using the included USB 3.0 cable, connect the USB Type-B side of the cable
into the port identified by the icon on the back of the CS-700 unit.
Connect the other end of the cable to the USB 3.0 port on the computer
running the third party softphone, webinar, or conferencing application.
Connect the CS-700 USB cable directly into the attached PC device. If a USB
3.0 cable longer than the length of the one provided is required, please ensure
that extension cables are fully USB 3.0 compliant and certified for video
applications. Find a list of approved USB 3.0 extension cables in the appendix.
Be sure the PC USB Port supports USB 3.0. The camera of the CS-700 will
send an uncompressed 1080p HD image over HD 3.0.
Note: The CS-700 will also support USB 2.0 connections with a reduced image
resolution of 360p. If limited video quality is observed, verify that the
USB port on the PC is truly 3.0.
The computer may detect new driver software and install it; wait until the
install has completed before continuing.
For optimal audio performance when using a Windows computer, please follow
the instructions in the
required when using macOS or Chrome OS devices.

Select device

In your operating system select the "Yamaha AudioVideo Device" as your
default audio playback and recording device.
appendix section. No additional configuration is
15