Yamaha CS-700 Operation Manual page 86

disconnected Not in a call or phone is not registered.
update The call is transferred by the far end (with some call managers the call state will remain
"connected" after the transfer).
missed Incoming VoIP call missed due to Do-Not-Disturb.
USB Calls
active USB audio is active.
incoming Incoming USB call signal is received from host.
inactive USB audio is not active.
onhold USB audio is on hold.
connected-in- Call is in a conference.
conf
BT Calls
BT audio is active.
active
incoming Incoming BT call signal is received from connected phone.
inactive BT audio is not active.
onhold BT audio is on hold.
Call is in a conference.
connected-in-
conf
Format Examples:
get status 1
val status 1 connected
notify call.status 1 connected
Supported Products: CS700-AV, CS700-SP, CS700-DL, CS700-DS
status-all
Description: Query all call status. See "call-status" property for description of status types.
Property Actions: get
Command Definition:
Action Definition
get status-all
get
val status-all <"voip1-status"> <"voip2-status"> <"voip3-status">
response
<"usb-status"> <"bt-status">
Parameters:
Parameter Description
voip1-status VoIP line 1 call status
voip2-status VoIP line 2 call status
voip3-status VoIP line 3 call status
usb-status USB call status
bt-status Bluetooth call status
Format Examples:
get status-all
val status-all onhold connected disconnected disconnected disconnected
Supported Products: CS700-AV, CS700-SP, CS700-DL, CS700-DS
86