Yamaha CS-700 Operation Manual page 67

Property Type
voip.reg-use-proxy INDEXED_
OPTION
voip.user TEXT
voip.password TEXT
voip.id TEXT
voip.name TEXT
voip.reg-timeout NUMBER
voip.rereg-delay NUMBER
voip.use-timer INDEXED_
OPTION
voip.timer-se NUMBER
voip.timer-min-se NUMBER
Values
0 : No proxy
1 : Outbound only
2 : Acc only
3 : All
SIP username.
SIP user password.
SIP ID.
VoIP Display Name.
1-604800 : Registration timeout
in seconds
1-604800 : Auto re-registration
retry interval in seconds
0 : Inactive
1 : Optional
2 : Mandatory
3 : Always
90-604800 : Session timer in
seconds
1-604800 : Minimum session
timer value in seconds
Default Value Description
0 Indicates whether the SIP proxy server(s) specified in "proxy"
property should be used when registering. Selecting this option
will add the listed proxy server(s) to the route headers of the SIP
REGISTER request. 0=no proxy(default), 1=outbound only, 2=acc
only, 3=all.
SIP username for the account used to authenticate with the SIP
registrar and proxies. Required for VoIP support.
SIP password for the account used to authenticate with the SIP
registrar and proxies. Required for VoIP call support.
SIP ID used for SIP registration. If this field is left blank, the
voip.user (User name) field will be used as the ID.
VoIP Display Name. The Display Name is shown when an outbound
call is made. If no Display Name is provided, the User name will be
used. Please note that the IP PBX might override the Display name
sent by the device and replace it with names configured in the PBX.
60 Registration Timeout is the optional timeout for SIP account
registration, in seconds. The default is 60, and the maximum is
604800, which is 7 days.
300 Configure auto re-registration retry interval in seconds. If SIP
registration is unsuccessful, this property specified the time
duration between retry attempts in seconds. Default 300 seconds.
1 Specify the preference for using SIP session keep-alive timers.
1800 The expiration period (seconds) is the interval at which the phone
will consider the SIP session timed out if it does not receive a
refresh message from the remote phone. It is measured in seconds
and must be greater than 90.
90 SIP session timer minimal expiration period (seconds). This is the
minimum period that the device will accept when negotiating the
expiration period with the remote phone. If the session timer
expiration duration is less than this value, this value is used
instead. It is measured in seconds. Default 90.
67