Misaligned Camera Image (Far-End Video); No Camera Image At Far-End - Yamaha CS-700 Operation Manual

connection, with greatest impact being degraded video quality, either
with a resolution down-grade below HD, or through video artifacts and
freezes during network service interruptions.
 Optimize Camera Settings. Assuming video degradation is not resolution
or bandwidth related, various other camera settings can be optimized
through the UC Software Control Panel/Camera Settings, including
contrast, brightness, sharpness, Hue, and others.
 Check that the Power line frequency for anti-flicker is set correctly.
When using fluorescent lighting, using the wrong frequency setting might
lead to a flicker in the image. The frequency can either be set from the
UC application if supported, or from the Service Application's Camera
menu.

Misaligned Camera Image (Far-end video)

If the camera is projecting a poorly framed (misaligned) image to the far-end. Or
the conference room is configured such that the CS-700 is not symmetrically
aligned with the Table and/or the display, causing the camera field of view to
be misaligned.
In these cases adjust the vertical camera angle (see section Setting Up the
System), then make additional camera pan/tilt/zoom adjustments as
necessary to optimize for your room using the Service application.

No Camera Image at Far-end

 Ensure that Camera Mute is not enabled (showing red). If Camera Mute
is enabled, the far end should see a large "pause" image.
 Ensure that Camera Shutter is not partially closed – rotate completely
"UP".
 Ensure that UC Software properly sees and enables the Yamaha CS-700
Camera device within the software settings.
101