Step 1: Connecting This Unit - Yamaha PJP-50R Basic Operation Manual

■ Side panel
1 LINE port
Connect an analog telephone circuit.
2 LAN port
Connect a LAN cable for connection to network
equipment such as a PC, router, or hub. The LED lights up
when the port is connected to a network and blinks
according to the communication status.
■ Bottom panel
2
YAMAHA CORPORATION
MADE IN JAPAN
12V
AC ADAPTOR : PJP-PS01
THIS DEVICE COMPLIES WITH PART I5 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE INDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME NMB-003 DU CANADA.
1
1 2
LINE LAN
PJP-50R
MODEL NO.
Registration NO. US : A6RTE00BPJP50R
IC Registration NO. IC : 740B-PJP50R
IC REN : 0.1
PJP-50R
2 3
3 4 5
DC IN 12V IN AUDIO OUT
3 DC IN 12V terminal
Connect the provided AC adapter.
4 AUDIO IN terminal
Connect to the line output terminal or the headphone
output terminal of an audio equipment or PC.
5 AUDIO OUT terminal
Connect to the line input terminal or the microphone input
terminal of an audio equipment or PC.
1 Serial label
The label carries the following information.
• MODEL NO.: Model number of this unit.
• SER.: Serial number for use in management/
distinction of this unit.
• MAC ADDRESS: MAC address of this unit.
• Registration NO. (U.S. and Canada models only):
FCC (U.S.) and Industry Canada (IC) registration
number.
• IC REN (U.S. and Canada models only): Ringer
Equivalence Number (REN) of this unit.
2 Arrayed speakers
The four arrayed speakers on the bottom panel for use in
output of the audio from other parties communicating with
this unit.
3 Adjuster
If this system is unstable because the tabletop or desktop
is not flat, adjust the foot height using the adjuster.
Controls and Functions
5