Yamaha CS-700 Operation Manual page 23

When "Require HTTPS" is enabled, the web interface will switch from http to
https. Please note that when using HTTPS, the CS-700 device does not have a
certified security certificate and the web browser will warn of a potentially
unsecure connection.
"Enable Telnet access" allows the Telnet interface into the CS-700 to be
opened. Changing this setting will reboot the CS-700 unit. Username and
password for the Telnet access are roomcontrol and Yamaha-CS-700,
respectively.
Front Panel Settings
All of the front-panel CS-700 control buttons can be individually enabled or
disabled through these check boxes. De-selecting the respective setting will
disable the corresponding front panel button and light.
Power Saving Settings
The CS-700 unit will automatically enter into Power Saving Mode whenever idle
state is detected, and re-energize when activity is detected. This feature is
controlled through the Enable Power Saving Mode checkbox. When the power
savings setting is enabled, the user can select the time (in minutes) after which
23