Yamaha CS-700 Operation Manual page 9

Volume Control & Mute
The speaker volume can be increased or decreased using the volume up and
volume down buttons. The microphones are muted using the mute button.
The mute/unmute button is only functional when microphones are activated.
The microphone mute button provides a colored indication of mute status.
Three different microphone states correspond to the color of the LEDs.
Speaker / Volume State Volume LED Color
Speaker Volume Buttons Enabled White
Speaker Volume Buttons Not Enabled OFF
Microphone/Mute State MIC LED Color
Active microphones, unmuted Green
Active microphones, muted Red
Microphones not active OFF
Camera Shutter & Mute
The camera can be "muted" to prevent active video transmission. When muted,
the camera video stream is substituted with a "pause image" to the far-end
whenever the Camera Mute button is pressed. The same behavior is achieved
by manually closing the camera-shutter, using the shutter control wheel on the
right-side of the camera.
The camera mute button provides a colored indication of the camera mute
status. The button will light RED either when pressed or when the camera
shutter is closed.
Camera Streaming State Camera MUTE LED Color
Active camera, unmuted Green
Active camera, muted Red
Camera not active White
Camera software upgrade in process Slow Flash Red
Bluetooth Indicator and NFC Pairing
The Bluetooth indicator shows whenever the CS-700 is in active pairing mode
(flashing blue) or has actively connected with a local Bluetooth device (steady
blue). The NFC paring indicator enables Bluetooth devices capable of NFC
pairing to do so with the CS-700.
9