Yamaha CS-700 Operation Manual page 65

Property Type
ble.ble-pair- NUMBER
timeout
net.ip-addr TEXT
net.dhcp BOOLEAN
net.ip TEXT
net.subnet TEXT
net.gateway TEXT
net.domain TEXT
net.dns1 TEXT
net.dns2 TEXT
net.vlan INDEXED_
OPTION
net.vlan-id NUMBER
net.ntp-enabled BOOLEAN
net.ntp1 TEXT
net.ntp2 TEXT
net.ntp3 TEXT
net.ntp4 TEXT
Values
0 : No timeout
1-120 : Pairing timeout in
seconds
ip-address : IP address
0 : Disable DHCP
1 : Enable DHCP
IP address
IP address
IP address or DNS name.
IP address or DNS name.
IP address or DNS name.
IP address or DNS name.
0 : Disable VLAN
1 : Manually specify VLAN ID
2 : Automatically detect VLAN ID
0-4095 : VLAN ID
0 : NTP is disabled
1 : NTP is enabled
IP address or URL or DNS name.
IP address or URL or DNS name.
IP address or URL or DNS name.
IP address or URL or DNS name.
Default Value Description
60 BLE pairing timeout in seconds. After this time, the pairing mode
will stop. A value of 0 indicates no timeout. Default is 60 seconds.
Configure local address we intend to use.
1 Enables or disables DHCP. If DHCP is disabled, the Static IP Address,
Subnet Mask, and Default Gateway must be specified.
Static IP Address assigned to the phone.
Subnet Mask to determine the subnet to which the device belongs.
The Default Gateway is the device's default router on the IP
network.
Configure system domain address.
Address of the primary Domain Name System (DNS) server.
Address of the secondary Domain Name System (DNS) server.
2 Specifies VLAN behavior and support for the device. 'Automatic'
(2) should be used in environments that provide a Voice VLAN with
automatic detection, in which case the device will determine the
VLAN identifier and register in that network. If the environment
uses Voice VLAN but the Voice VLAN ID cannot be detected,
choose 'Enabled' (1) and specify the ID in the VLAN ID field,
net.vlan-id. 'Disabled' (0) switches off VLAN capabilities.
0 The manually specified LAN ID, from 0-4095. If the VLAN mode is
automatic, this is the detected VLAN ID if VLAN is active.
1 Enabled or disable the network time. 0 - disabled, 1 - enabled.
0.pool.ntp.org Configure first NTP (Network Time Protocol) server address.
1.pool.ntp.org Configure second NTP (Network Time Protocol) server address.
2.pool.ntp.org Configure third NTP (Network Time Protocol) server address.
3.pool.ntp.org Configure fourth NTP (Network Time Protocol) server address.
65