Yamaha CS-700 Operation Manual page 48

time, pairing mode or the connecting mode will terminate. A value of 0
indicates no timeout. The default value is 60 sec.
The "Enable NFC" box allows control over the NFC pairing feature. De-selecting
this box will disable the NFC pairing feature associated with the NFC front-
panel indicator button. System defaults to NFC-enabled.
When clicking Enter Pairing Mode the Yamaha CS-700 starts to broadcast its
Bluetooth information and can now be found from other Bluetooth devices.
Exit Pairing Mode will end the broadcast of the Bluetooth information. Unpair
All Devices will remove all Bluetooth information of previously paired devices.
Camera
The Camera tab allows invoking the electronic Pan/Tilt/Zoom settings of the
CS-700. Pan and Tilt will only work when the camera has zoomed in. Zoom
values are from 1 – 22, Tilt from -18 to +18, Pan from -30 to +30. At the
maximum zoom of 22, the camera offers a 45 degree field of view.
Once satisfied with the settings, they can be stored as PTZ Home. The PTZ
Home settings are automatically applied every time a new USB connection is
being made to the CS-700. Clicking on Go to PTZ Home will restore the camera
to the stored PTZ home values.
Finally, the power line for anti-flicker setting allows selecting the frequency of
the power line. In environments using florescent lighting the image of the CS-
700 might be flickering unless the frames per second sent adjust to the power
frequency.
48