Yamaha CS-700 Operation Manual page 64

Property Type
audio.high-pass- INDEXED_
filter OPTION
audio.analog- BOOLEAN
audio-in-mode
audio.analog- NUMBER
audio-in-gain
audio.ring-tone INDEXED_
OPTION
audio.ringer- TEXT
volume
camera.camera- TEXT
ptz-home
bt.bt-enable BOOLEAN
bt.bt-name TEXT
bt.bt-pin TEXT
bt.bt-pair-timeout NUMBER
ble.ble-enable BOOLEAN
Values
0 : None (default)
1 : 110 Hz
2 : 140 Hz
3 : 175 Hz
4 : 225 Hz
0 : Automatic gain setting
1 : Manually specify gain setting
0.0-17.0 : Manual gain setting
0-5 : Ring-tone index
1-18 : Ringer volume level
String format:
<pan> <tilt> <zoom>
pan: <-30..30> (default value is 0)
tilt: <-18..18> (default value is 0)
zoom: <1..22> (default value is 1)
0 : disable
1 : enable
Name of device.
Default value is the product
name concatenated with the
system's MAC address
pin : 4-digit string
0 : No timeout
1-120 : Pairing timeout in
seconds
0 : Disable BLE
1 : Enable BLE
Default Value Description
0 High-Pass filter setting. High-Pass filters are provided to adjust to
room and application requirements. Use the High-Pass filter in
rooms that have a high background noise in the low frequencies
(air conditioning, lighting fixtures, etc.). All filters are bi-quad
filters, reducing the signal by 6dB per octave.
0 For the TV audio in port, select the gain setting mode, either auto
and manual.
4.5 For the TV audio in port, if analog-audio-in-mode is manual, then
this is the gain value in dB.
0 VoIP ring-tone selection.
7 Configure VoIP ringer volume. 1 : 18, default 7.
0 0 1 Default PTZ settings for home position. When the device detects
that the upstream USB connection has been established, either at
startup or after a USB disconnection, it will revert to the default
PTZ settings.
0 Enable or disable Bluetooth basic-rate.
"Yamaha CS- The Bluetooth basic-rate device name advertised over the air.
700 " + MAC
address
0000 The Bluetooth basic-rate pin for pairing. Pins are 4 digits.
60 Bluetooth basic-rate pairing timeout in seconds. After this time,
the pairing mode will stop. A value of 0 indicates no timeout.
Default is 60 seconds.
0 Enable or disable BLE.
64