Fisher & Paykel EB60 User Manual page 47

PROBLEM
The appliance
does not turn on
The infuser
cannot be
extracted
At the end of
descaling, the
appliance requests
a third rinse
The milk does not
come out of the
milk spout
The milk contains
large bubbles
and squirts out
of the milk spout
or there is little
froth
The machine
emits noises or
small puffs of
steam while not
in use
TROUBLESHOOTING
POSSIBLE CAUSE
It is not plugged into
the mains socket.
The main switch is not
turned on.
The appliance has not
been turned off correctly.
During the two rinse
cycles, the water tank has
not been filled to the MAX
level.
The lid of the milk
container is dirty.
The milk is not cold
enough or is not light or
skimmed milk.
The froth adjustment dial
is incorrectly adjusted.
The milk container lid or
froth adjustment dial is
dirty.
The hot water/steam
connection nozzle is dirty.
The machine is ready
for use, or has recently
been turned off, and
condensation is dripping
into the hot vaporiser.
WHAT TO DO
Plug into the mains socket.
Press the main switch.
Turn the appliance off by pressing
the AUTO OFF button (see section
'Turning the appliance off').
Follow the instructions displayed by
the appliance, but first empty the drip
tray to avoid the water overflowing.
Clean the milk container lid as
described in the 'Cleaning the milk
container' section.
Use light or skimmed milk at refrigerator
temperature (about 5°C (41°F)). If the
result is not as you wished, try using a
different brand of milk.
Adjust following the instructions in the
'Adjusting the amount of froth' section.
Clean the milk container lid and froth
adjustment dial as described in the
'Cleaning the milk container' section.
Clean the connection nozzle as
described in section 'Cleaning the
hot water/steam connection nozzle'.
This is part of normal operation.
To limit this occurring, empty
the drip tray.
45