Menu Settings - Fisher & Paykel EB60 User Manual

Rinsing
Use this function to deliver hot water from the coffee spouts and steam wand,
to clean and heat the appliance's internal circuit. Place a container under the coffee
and hot water spouts.
IMPORTANT!
Do not leave the appliance unattended
while hot water is being delivered.
1
Press
.
2
Press or
on the display.
3
Press to start rinsing.
1
After a few seconds, hot water is delivered first from the coffee spouts, then
from the steam wand (if inserted). RINSING UNDERWAY, HOT WATER FROM SPOUTS
appears on the display, along with a progress bar which fills gradually to indicate
the stage of completion.
2
The rinsing cycle will finish automatically. If you would like to cancel this function
press CANCEL.
Note:
If the appliance is not used for more than four days, when switched on again, we
●
recommend performing three rinses before use.
After cleaning, it is normal for the grounds container to contain water.
●
Drinks settings
This allows you to view the current drinks settings for each profile. By using this
function, you can reset drinks settings to the default value. To customise the drinks
settings to your personal preference, see the 'customising drinks' section.
1
Check that the profile you want to change the drinks settings for is active.
The current active profile is displayed on the home screen. Press
2
Press or
press NEXT.
3
Press . The values for the first drink appear on the display.
4
The settings for each drink are displayed on vertical bars. The default value is indicated
by a circle symbol at the side of the bar, while the current value is highlighted by the
solid part of the vertical bar.
5
To go back to the settings menu, press BACK. To scroll and display more drinks,
press NEXT.
6
To reset the default values for the drink displayed, press
7
Press to confirm. Press BACK to go back.
8
DEFAULT VALUES SET will appear on the display. Press
to the default value.
Note:
To change the drink settings in another profile, go back to the home screen, select the
●
required profile and repeat the steps.
To reset all the drinks in a profile to the default values, see the 'Default Values' section.
●

MENU SETTINGS

until RINSING appears
until DRINKS SETTINGS appears on the display. To change the drink
.
.
RESET
. The drink has been reset
13