DISPLAYED MESSAGE
INSERT WATER SPOUT
INSERT MILK
CONTAINER
INSERT INFUSER
ASSEMBLY
WATER CIRCUIT
EMPTY PRESS OK
TO START FILLING
PROCESS
DISPLAYED MESSAGES
POSSIBLE CAUSE
The hot water
spout is not inserted
or is not inserted
correctly.
The milk container
is not inserted
correctly.
The infuser has not
been replaced after
cleaning.
The water circuit
is empty.
WHAT TO DO
Insert the water spout as far as
it will go.
Insert the milk container as far as
it will go.
Insert the infuser as described in
section 'Cleaning the infuser'.
Press
to deliver water from the
spout until it flows out normally.
Delivery stops automatically.
If the problem persists, make sure
the water tank is fully inserted.
41