Fisher & Paykel EB60 User Manual page 37

IMPORTANT!
Hot water containing chemicals flows out of the spout. Take care to avoid contact
with splashes of this solution.
8
Press to confirm that you have added the descaling solution. DESCALING UNDERWAY,
PLEASE WAIT appears on the display. The descale programme starts and the descaler
liquid comes out of the steam and coffee spouts. A series of rinses and pauses is
performed automatically to remove all the scale residues inside the coffee maker.
After about 25 minutes, descaling stops:
9
RINSE AND FILL WATER TANK
UP TO MAX LEVEL: the appliance is
now ready to rinse with fresh water.
Empty the container used to collect
the descaler solution. Remove the
water tank, rinse under running water,
fill with fresh water up to the MAX level
and put back in the appliance.
!3
(If the filter is installed) INSERT
FILTER INTO ITS HOUSING.
Press NEXT and extract the water tank.
Replace the water softener
filter if removed previously.
DESCALE
!0
POSITION 2L CONTAINER OK TO START
RINSING: Place the container used to
collect the descaler solution under the
and steam spouts and press
!1
Hot water is delivered first from the
coffee spouts, then from the steam
spout and RINSING UNDERWAY,
PLEASE WAIT is displayed.
!2
When the water in the tank has run
out, empty the container used to
collect the rinsing water.
!4
RINSE AND FILL WATER TANK
UP TO MAX LEVEL: Fill the tank
up to the MAX level with fresh water.
.
35