Fisher & Paykel EB60 User Manual page 34

Cleaning the milk container
Each time the milk container needs to be re-filled, clean it as described below:
1
Lift and remove the lid.
2
Extract the milk container from the thermal casing, holding it by the two side grips.
IMPORTANT!
The thermal casing must not be filled with or immersed in water. Clean with a damp
cloth only.
3
Remove the milk spout and intake tube.
4
Turn the froth adjustment dial clockwise
to the INSERT position and pull off.
32
Lid with milk frother
Frothed milk spout
(adjustable)
Frothed milk
intake tube
Milk container
Thermal casing
CLEANING
Froth adjustment
and clean dial
Lid release buttons
5
Wash all the components of the
frother thoroughly with hot water
and dishwashing liquid. All components
and the container are dishwasher safe.
Make sure there are no milk residues
on the hollow and groove under the
dial. If necessary, scrape the groove
with a toothpick.