Fisher & Paykel EB60 User Manual page 22

Making long coffee
IMPORTANT!
Halfway through preparation, the message ADD PRE-GROUND COFFEE,
MAXIMUM ONE MEASURE will be displayed. Add one level measure of
pre-ground coffee and press
Tips for a hotter coffee
If you prefer a hotter coffee, you should:
Perform a rinse cycle by selecting the RINSING function in the settings menu.
●
Warm the cups with hot water using the hot water function
●
(see section 'Delivering hot water').
Increase the coffee temperature in the settings menu
●
(see section 'Coffee temperature').
Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and should not require
adjusting initially.
However, if after making the first few drinks you find that the coffee is either too
weak, not creamy enough or delivery is too slow (a drop at a time), this can be
corrected by adjusting the grinding adjustment dial.
Note:
The grinding adjustment dial must only be turned when the coffee mill is
●
in operation during the initial phase of coffee preparation.
If the coffee is delivered too slowly or not at all, turn one click clockwise towards 7.
●
For fuller bodied creamier coffee, turn one click anti-clockwise towards 1
●
(do not turn more than one click at a time otherwise the coffee could be
delivered at a drop at a time).
These adjustments will only be evident after at least two cups of coffee have
●
been delivered. If this adjustment does not obtain the desired result, turn the
dial another click.
20
MAKING COFFEE
.