Fisher & Paykel EB60DSXB1 Installation Instructions Manual

Installation instructions

Checking for transport damage

After removing the packaging, make sure the product is complete and undamaged and that all accessories are
present. Do not use the appliance if it is visibly damaged. Contact Customer Care.

Installing and connecting the appliance

• Installation must be performed by a qualified professional in compliance with legislation in force
• This appliance should be connected to a circuit which incorporates an isolation switch providing
• The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of reach of
• Do not install the appliance in rooms where the temperature may drop to 0°C or lower.
• Customise the water hardness as soon as possible following the instructions in section
• Check that the mains power supply voltage corresponds to the value indicated on the rating
• Connect the appliance to an efficiently earthed and correctly installed socket with a minimum
• If the power socket does not match the plug on the appliance, have the socket replaced with a
• To comply with safety directives, an omnipolar switch with a minimum contact distance of 3 mm
• Do not use multiple sockets or extensions.
• Safety cutout devices must be included in the mains power supply in compliance with the

Disposal

Electrical appliances must not be disposed of as household waste.
Appliances with this symbol are covered by European Directive 2002/96/EC.
All unused electric and electronic appliances must be disposed of separately from household waste by taking
https://producthelp.fisherpaykel.com/nz/Cook/Companion_Products/Built-in_Coffee_Maker/EB60DSXB1/User_Guide_EB60D...
in the country of installation (see
full disconnection from the power supply.
children.
'Changing and setting menu
plate on the bottom of the appliance.
current rating of 10A only.
suitable type by a qualified professional.
must be installed.
installation regulations in the country concerned.
Built-in installation).
parameters', under "Setting water hardness".
Updated: Sun, 22 Mar 2020 12:25:55 GMT
Powered by
1