Fisher & Paykel EB60 User Manual page 25

MAKING CAPPUCCINOS AND MILK-BASED COFFEES
Cleaning the milk container after use
IMPORTANT!
When cleaning the internal tubes of the milk container, a little hot water and steam
may leak out of the frothed milk spout. Take care to avoid burns from hot splashes
of water.
Each time you use a milk function, TURN DIAL TO <CLEAN> POSITION TO START
CLEANING appears on the display and the milk frother lid must be cleaned:
1
Leave the milk container in the machine (you do not need to empty it).
2
Place a cup or other container under
the frothed milk spout.
4
PLACE A RECIPIENT UNDER MILK
SPOUT appears on the display
together with a bar which gradually
fills to indicate the stage of completion.
Cleaning stops automatically.
6
Turn the dial back to one of the
froth selections.
Note:
When making a number of cappuccinos or milk based coffees, clean the milk
●
container after you have prepared the last beverage only. To proceed with making
the next beverages, when the CLEAN message is displayed, press BACK.
If you do not clean the milk container,
●
that it needs cleaning.
The milk container can be kept in the refrigerator.
●
In some cases, before cleaning you must wait for the appliance to heat up.
●
3
Turn the froth adjustment dial
to CLEAN, CLEANING
MILK CONTAINER UNDERWAY
appears on display.
5
Remove the milk container and
clean the steam connection nozzle
with a sponge.
appears on the display to remind you
23