Descale - Fisher & Paykel EB60 User Manual

IMPORTANT!
Read the instructions and the labelling on the descaler pack.
●
Only use descaler authorised by the manufacturer. Using unsuitable descaler
●
and/or performing descaling incorrectly may result in faults not covered
by the manufacturer's guarantee.
Descale the appliance when DESCALING NEEDED PRESS OK TO START (~45min)
appears on the display. To descale immediately, press
from point four.
To descale the appliance later, press BACK. The
to remind you that the appliance needs descaling (the message appears each time
you turn the appliance on).
To access the descaling menu:
1
Press .
2
Press or
3
Press to start the descaling cycle then follow the instructions on the display.
4
REMOVE WATER SOFTENER FILTER:
remove the water tank, remove the
water softener filter (if present) and
empty the water tank. Press NEXT.
6
EMPTY GROUNDS CONTAINER AND
DRIP TRAY: remove, empty and replace
the drip tray and grounds container.
Press NEXT.
34
until descale appears on the display.

DESCALE

symbol appears on the display
5
ADD DESCALER (LEVEL A) AND
WATER (UP TO LEVEL B): Pour the
descaler into the tank up to the level A
marked inside the tank, then add water
up to level B and put the water tank
back. Press NEXT.
7
PLACE 2L CONTAINER UNDER SPOUTS
PRESS
Place an empty suitably sized container
under the steam wand and coffee
spouts.
and follow the instructions
A B
TO START DESCALING: