Alarm Rules - Bosch MIC IP starlight 7000i User Manual

48 en | Alarm
2.
3.
7.7

Alarm Rules

An alarm rule can define which input(s) activate which output(s). Basically, an alarm rule
allows you to customize the camera to respond automatically to different alarm inputs.
To configure an alarm rule, specify one input from a physical connection, from a motion
detection trigger, or from a connection to the camera's LIVE page. The physical input
connection can be activated by dry contact devices such as pressure pads, door contacts, and
similar devices.
Next, specify up to two (2) rule outputs, or the camera's response to the input. Outputs
include a physical alarm output, an AUX command, or a preposition scene.
Select one of the following output commands for both Output 1 and Output 2 settings:
Note: Not all options are available for all cameras.
–
–
–
–
Click the checkbox Enabled to activate the alarm.
Click Set to save. The camera's system activates the alarm rules.
2017.11 | 1.2 |
Enter new scripts in the Alarm Task Editor field or change existing scripts in line with your
requirements.
When finished, click Set to transmit the scripts to the device. If the transfer was
successful, the message Script successfully parsed. is displayed over the text field. If it
was not successful, an error message is displayed with further information.
None: no defined command.
AUX on: defines a standard or custom keyboard ON command.
AUX off: defines a standard or custom keyboard OFF command.
Pre-position: defines a pre-position from shot 1-256. (Note: This option is not available
for the input Time range.)
User Manual
MIC IP starlight 7000i
Bosch Security Systems