Lens Settings - Bosch MIC IP starlight 7000i User Manual

MIC IP starlight 7000i
Night mode shutter
Controls the time period for which light is gathered by the collecting device while in night
mode. Values are ¼, 1/8, 1/15, and 1/30; the default is 1/15.
Noise Reduction
Turns on the 2D and 3D noise reduction feature.
2D noise reduction level
This field operates in conjunction with the field Noise reduction. When Noise reduction is set
to "On," then the Noise reduction level field is active.
Select the appropriate level of noise reduction, from 1 to 5 (2 is the default).
3D noise reduction level
This field operates in conjunction with the field Noise reduction. When Noise reduction is set
to "On," then the Noise reduction level field is active.
Select the appropriate level of noise reduction, from 1 to 5 (2 is the default).
Intelligent Defog
With the Defog mode feature, visibility can be improved significantly when viewing foggy or
other low-contrast scenes.
–
–
–
Defog intensity
Select the amount of intensity for the defog feature.
Note: This field appears only when the option in Intelligent Defog is "On" or "Auto."
6.6

Lens Settings

Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
–
–
Focus speed
Use the slider (from 1 to 8) to control how fast the Auto focus will readjust when the focus
becomes blurred.
IR focus correction
Optimizes the focus for IR lighting. Options are: On, Off (default).
Day near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the day.
Night near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the night.
Auto iris
Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type
of lens is recommended for use where there are low light or changing light conditions.
–
Bosch Security Systems
On - Defog is always active.
Off - Defog is disabled.
Auto - Defog activates automatically as needed.
One Push (default; commonly called "Spot Focus"): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved
again.
Auto Focus: Auto Focus is always active.
Manual: Auto Focus is inactive.
Constant (default): camera constantly adjusts to varying light conditions (default).
If you select this option, the camera makes the following changes automatically:
User Manual
Camera | en 35
2017.11 | 1.2 |