Live Functions - Bosch MIC IP starlight 7000i User Manual

MIC IP starlight 7000i
Show VCA trajectories
The trajectories (motion lines of objects) from the video content analysis are displayed in the
live video image if a corresponding analysis type is activated. The trajectory is shown as a
green line following the object base point.
The following table identifies the trajectory lines that appear.
Image being viewed
Visible
Thermal
Note: For details about how VCA objects appear on the Live page, refer to the section
Understanding the Fusion Feature.
Show overlay icons
Select this check box to show overlay icons on the live video image.
Show VCA items
Shows alarm fields, lines and routes configured for the video analytics in the following colors:
–
–
Latency mode
Select the required latency mode:
–
–
–
JPEG resolution
You can specify the size of the JPEG image on the Live page. Options are Small, Medium,
Large, 720p, 1080p, and "Best possible" (default).
JPEG interval
You can specify the interval at which the individual images should be generated for the M-
JPEG image on the Live page.
JPEG quality
You can specify the quality at which the JPEG images appear on the Live page.
5.2

LIVE Functions

On this page you can adapt the functions on the LIVE page to your requirements. You can
choose from a variety of different options for displaying information and controls.
1.
2.
Bosch Security Systems
Green: Fields, lines and routes used in a task are displayed in green. They can be edited
but not deleted.
Red: Fields, lines and routes currently in alarm mode are displayed in red.
Low delay: Default mode. Provides marginal buffering to display fluent video under
normal network conditions.
Smooth video: Allows the buffer to automatically adjust to cover network jitter, inducing
higher latency.
Unbuffered: Displays video as it is received by the decoder with minimum latency. Allows
the video to jerk if there is network jitter.
Check the box for the items that are to be made available on the LIVE page. The selected
items are indicated by a check mark.
Check whether the required functions are available on the LIVE page.
Imager that Detected Object
Visible imager
Thermal imager
Visible imager
Thermal imager
User Manual
Web Interface | en
Resulting trajectory lines
Solid green line
Dotted green line
Dotted green line
Solid green line
2017.11 | 1.2 |
21