Bosch MIC IP starlight 7000i User Manual page 33

MIC IP starlight 7000i
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Sodium red level
Adjust the level of red for sodium vapor lighting with the slider from 0 to 255.
Sodium blue level
Adjust the level of blue for sodium vapor lighting with the slider from 0 to 255.
Note: The fields Sodium red level and Sodium blue level appear only when the value in the
field White balance is "Sodium lamp auto" or "Sodium lamp."
Saturation
The percentage of light or color in the video image. Values range from 60% to 200%; the
default is 110%.
Color hue
The degree of color in the video image (HD only). Values range from -14° to 14°; the default is
8°.
Intelligent Dynamic Noise Reduction
Select On to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
Gain control
Adjusts the automatic gain control (AGC).
–
–
Fixed Gain
Use the slide to select the desired number for fixed gain. The default is 2.
Maximum Gain Level
Controls the maximum value the gain can have during AGC operation. To set the maximum
gain level, choose from:
–
–
–
AE-response speed
Select the speed of the response of auto exposure. Options are Super slow, Slow, Medium
(default), Fast.
Sharpness mode
Select the appropriate sharpness mode. Options are Manual and Auto.
Sharpness level
This field is active when Sharpness mode is set to Manual.
Adjust the level of sharpness of the video image (from 1 to 15) using the slider.
Adjustments to the Sharpness level appear on the OSD.
Shutter Mode
–
–
Bosch Security Systems
AGC (default): Automatically adjusts the gain to the lowest possible value needed to
maintain a good picture.
Fixed: no enhancement. This setting disables the Max. Gain Level option.
Normal
Medium
High (default)
Fixed: The shutter mode is fixed to a selectable shutter speed.
Automatic exposure: increases camera sensitivity by increasing the integration time on
the camera. This is accomplished by integrating the signal from a number of consecutive
video frames to reduce signal noise.
User Manual
Camera | en 33
2017.11 | 1.2 |