Keysight PD1000A Operating Manual page 5

Spk accessory kit bias t networks
Hide thumbs Also See for PD1000A:
Table of Contents

Advertisement

Safety and Regulatory Symbols
A CAUTION denotes a hazard. It
calls attention to an operating pro-
cedure or practice that, if not cor-
rectly performed or adhered to,
could result in damage to the
product or loss of important data.
Do not proceed beyond a CAUTION
notice until the indicated condi-
tions are fully understood and met.
A WARNING denotes a hazard. It
calls attention to an operating pro-
cedure or practice, that, if not cor-
rectly performed or adhered to,
could result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully under-
stood and met.
Products display the following sym-
bols:
Refer to manual for
additional safety
information.
Earth Ground.
Chassis Ground.
Alternating Current (AC).
Direct Current (DC).
Standby Power. Unit is not
completely disconnected
from AC mains when power
switch is in standby position
Indicates that antistatic
precautions should be
taken.
Electro-Magnetic Compatibility (EMC) Information
The Test Solution is sensitive to electro-magnetic disturbances in the frequency range of 80 MHz to 6 GHz.
To minimize the risk of incorrect measurements avoid intentional radiators in close proximity to the Test Solution.
The CE mark is a registered trademark
of the European Community. This
product complies with the relevant
European legal Directives: EMC Direc-
tive and Low Voltage Directive.
ICES/NMB-001 indicates that this ISM
device complies with Canadian ICES-
001.
Cet appareil ISM est conforme à la
norme NMB-001 du Canada.
ISM GRP 1-A indicates that this instru-
ment is an industrial scientific and
Medical Group 1 Class A product.
Waste Electrical and
Electronic
Equipment (WEEE)
Directive
2002/96/EC
This product complies with the WEEE
Directive (2002/96/EC) marking
requirement. The affixed product label
(see below) indicates that you must not
discard this electrical/electronic prod-
uct in domestic household waste.
Product Category: With reference to
the equipment types in the WEEE
directive Annex 1, this product is clas-
sified as a "Monitoring and Control
instrumentation" product.
Do not dispose in domestic household
waste.
To return unwanted products, contact
your local Keysight office for more
information.
This symbol represents the time period
during which no hazardous or toxic
substance elements are expected to
leak or deteriorate during normal use.
Forty years is the expected useful life
of this product.
v

Advertisement

Table of Contents
loading

Table of Contents