Club Car Carryall 295 Owner's Manual page 45

Both the Periodic Service Schedule and the Periodic Lubrication Schedule must be followed to
keep vehicle in optimum operating condition.
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL
Daily service by owner
or trained technician
Monthly service by owner
or trained technician
Semiannual service by trained
technician only
(or every 50 hours of operation,
whichever comes first)
Periodic Service Schedule continued on next page....
2007 Carryall 295 Intellitach and XRT 1550 Intellitach Diesel Vehicle Owner's Manual
SERVICE
Engine
Fuel filters
Brakes
Hydraulic System
Engine
Tires
Transmission and differentials
General vehicle
Battery
Front wheel alignment and toe-in
Electrical wiring and connections
Brake system
Periodic Service Schedule
Check engine oil level; add if necessary.
See Engine Oil Level Check on
page 47.
Diesel vehicles: Check engine coolant;
add if necessary. See Engine Coolant
Level Check on page 54.
Clean debris from radiator.
Diesel vehicles: Drain water from fuel
filter. See Draining Water from Fuel
Filter on page 57.
Check brake fluid; add if necessary.
Check brake pedal for proper operation.
See Performance Inspection on page 22.
Check hydraulic fluid; add if necessary.
See Hydraulic System on page 53.
Check engine circulating air passage;
visually inspect unshrouded area around
engine exhaust for grass and debris and
clean if necessary.
Diesel vehicles: Check for grass and
debris around the radiator.
Check air pressure and adjust if
necessary. See Vehicle Specifications
on page 63.
Check lubricant levels. Add if necessary.
See Lubrication Level Check for Front
Differential, Transmission, and Rear
Differential on page 51.
Wash engine compartment and underside
of vehicle. Do not wash engine when hot.
Clean terminals and wash dirt from
casing; check electrolyte level. Add
distilled water if necessary. See page 59.
Check and adjust if necessary. See
Section 7 – Steering and Front
Suspension in the appropriate
maintenance and service manual.
Check for tightness and damage.
Inspect master cylinder, brake lines, and
hoses for damage or leakage.
Check park brake cables for damage;
replace if necessary.
Check brake pads and discs; replace if
necessary. For brake wear in procedure,
see Hydraulic Brakes in the Pre-
Operation and Daily Safety Checklist
on page 21. See also Section 6 – Brake
System in the appropriate maintenance
and service manual.
Page 43