Club Car Carryall 295 Owner's Manual page 37

Figure 37 Attachment Arm Pins and Retaining Rings
Installing the Attachment Arm
1. Align the vehicle with the attachment arms (Figure 38).
2. Stop the engine, put the Forward/Reverse Handle in NEUTRAL, engage the park brake, unfasten your
seat belt, and exit the vehicle.
3. Remove the retaining rings (2) and the pins (1) from the attachment arm (both sides) (Figure 37).
4. Raise the attachment arms and align the holes in the attachment arms to the vehicle mounting holes
(Figure 39).
5. Install the pins (2) and retaining rings (1) (both sides).
ý
WARNING
• Do not have hands in the area of the cylinders when extending or retracting the cylinders.
6. Remove the two retaining rings (4 and 7) and pins (3 and 6) that secure the two cylinders (1 and 5) to
the locking plate (2) (Figure 40).
Figure 39 Align the Attachment Arm Holes
2007 Carryall 295 Intellitach and XRT 1550 Intellitach Diesel Vehicle Owner's Manual
Figure 38 Align the Vehicle to Attachment Arms
Figure 40 Remove Retainer Pins from Both Cylinders
Attachments and Buckets
Page 35