Compit SOLARCOMP 951 Installation And Operating Instructions Manual page 34

Mulfunctions
Sensor failure signal can mean that the sensor is not connected. When several
sensors fail, information on the last sensor failure is displayed.
T1panel SENSOR
FAILURE
T2tank SENSOR
FAILURE
T3tank SENSOR
FAILURE
T4 SENSOR
FAILURE
PANEL
OVERHEAT
MAX DHW
TEMPERATURE
HEAT
CONVECTION
34
Solar panel sensor T1 failure.
Temperature reading is replaced by "!!!"
Tank sensor T2 failure.
Temperature reading is replaced by "!!!"
Tank sensor T3 failure.
Temperature reading is replaced by "!!!"
Sensor T4 failure
Temperature reading is replaced by "!!!"
Solar panel overheating means that the panel temperature has
exceeded value D07.OVERHEAT TEMP. (operation blocked)
Tank temperature
TEMPERATURE
Gravity heat convection from the tank at night. This signal does not
affect the controller's operation. The message is cancelled by
pressing the button.
has exceeded
S C
OLAR OMP
D04. MAXIMUM
951 model u7.x, Rev. 1
DHW