Compit SOLARCOMP 951 Installation And Operating Instructions Manual page 11

Group B. User Settings
Use and
access the editing mode. Press
B. USER SETTINGS
01. DHW TANK SET
TEMPERATURE
50°C
MIN 0
B. USER SETTINGS
02. POOL HEATING
ALLOWED
NO
B. USER SETTINGS
03. DHW TANK 2 SET
TEMPERATURE
45°C
MIN 0
B. USER SETTINGS
04. HEATER SET
TEMPERATURE
35°C
MIN 0
B. USER SETTINGS
05. HEATING COIL
SET TEMPERATURE
35°C
MIN 0
B. USER SETTINGS
06. COIL BLOCKED WHEN
PANEL ACTIVE
NO
B. USER SETTINGS
07. BOILER LOADED DHW
SET TEMPERATURE
35°C
MIN 0
S C 951 model u7.x, Rev. 1
OLAR OMP
buttons to highlight the desired option and then press
Set temperature of the solar tank.
Default setting: 50°C.
MAX 85
Function allowing pool heating.
Default setting: NO
Set temperature of DHW tank 2.
Parameter available only in variant no. 11.
Default setting: 45°C
MAX 85
Set temperature of the flow water heater.
Available only in variant no. 13.
Default setting: 35°C
MAX 80
Set temperature of the heating coil.
Parameter available only in variant no. 3.
Default setting: 35°C.
MAX 80
Function blocking the activation of the heating coil when the
solar pump is working.
Blocked heating coil operation when the solar pump is working
saves energy.
Parameter available only in variant no. 3.
Default setting: NO.
Set temperature up to which DHW tank is loaded from the
boiler.
Parameter available only in variant no. 8.
Default setting: 35°C.
MAX 80
to move up one menu level.
to
11