Compit SOLARCOMP 951 Installation And Operating Instructions Manual page 18

D. SERVICE SETTINGS
26. RS485 NETWORK
ADDRESS
10
MIN 0
D. SERVICE SETTINGS
27. RS485 NETWORK
SPEED
2400
MIN 1200 MAX 9600
D. SERVICE SETTINGS
28.RESTORE DEFAULT
SETTINGS
YES
D29. VARIANT
Group E. Manual Mode
E. MANUAL MODE
SOLAR PUMP
P2 RELAY Ο
P3 RELAY Ο
Manual mode is automatically disabled when the user fails to press any button for 4
minutes.
Group F. Language
F. JĘZYK/LANG./SPRACHE
POLSKI
√ ENGLISH
DEUTSCH
18
Controller's address in the monitoring network.
Default setting: 10
MAX 99
Transmission speed.
Default setting: 1200
Restoring default settings.
To restore default settings enter code 70 and press
Selection of operation variant.
Default setting: 1
Use
0%
and then press
For the solar pump, the figure will start flashing which means
you can change the pump's output using
buttons.
When the control light is on it means the relay is active.
Use
and then press
and buttons to highlight the desired option
to save the change.
and buttons to highlight the desired option
to save the change.
S
OLAR
C 951 model u7.x, Rev. 1
OMP
.
and