Color Adjust; Color Adjust (Computer Signals) - Eiki EK-50LU Owner's Manual

Color Adjust (with Computer Signal)
Menu operation
1 Press the MENU button on remote controller and the OSD displays. Press
Color Adjust icon, press
2 Press button to point to required item and press OK button to confirm your selection.
Image mode
Switch image mode to fit the image source and
the projector. (default setting is Standard)
Dynamic
The light output is maximized for use in bright
room.
Standard
Normal picture level preset on the projector.
Cinema
Enriched grayscale for viewing movies.
Bla ckboard (Green)
An image mode designed for displaying on a
blackboard (Green). It boosts quality of image
projected on blackboard (Green). This is designed for a board in green rather than black as indicated
by its name.
DICOM
A highly clear X-ray image is reproduced. Digital radiographs with excellent detail and clarity for medi-
cal training, presentations and conferences.
Colorboard
Image mode suitable for image projecting on surface of wall in red, blue, yellow or green.
User Image
Default image mode set by users in the Image Adjust menu.
Dynamic mode
Adjust the light source to optimize the contrast of the image automatically.
Press button to select the setting
Off: Disable the Dynamic mode.
Mode 1: adjust the light source with smaller range.
Mode 2: adjust the light source with medium range.
Mode 3: adjust the light source with larger range.
Note:
- The light source will close with input as whole blace image as setting as Mode 2 and Mode 3, and the light source will
launch with input as normal image.
Contrast
Press button to decrease contrast, press
Brightness
Press button to decrease brightness, press
Color Temp.
Press button to select required color temperature
High: Blueish image color
Mid.: Natural image color
Low: Reddish image color
OSD setting-Color Adjust
button or OK button to confirm your selection.
button to increase contrast.

Color adjust

Image mode
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
button to increase brightness
button select
Standard
32
32
Mid
32
32
32
8
41