Table of Contents
Advertisement
Note
Extra Foot dimensions and calculations are stored temporarily in ana-
lyzer memory.
Enter key
Use the Enter key to advance back to the move screen this option was accessed
from.
Predict Mode
From the Predict Mode screens you can calculate the resulting alignment condi-
tion based on the current alignment condition and having moved the machine the
amount specified in the program. This is very useful when the machine cannot be
dropped any further in the vertical direction or if the machine is bolt bound hori-
zontally. The Predict Mode screens are reached by pressing the Predict Mode key
on the machine move screens. This option is available only when all dimensions for
both machines have been entered.
Selecting the Predict Mode option from the Vertical Move and Dual Move screens
displays the Predict Mode Vertical screen. This screen displays the movement calcu-
lated by the align program, and required to align the machine vertically. The target
indicates how close the machine vertical position is to being in tolerance. The
screen also allows entry of alternate machine moves for which the predict mode
computes the tolerance values were those moves actually made on the machine.
Laser Address Selection
3-145
Advertisement
Table of Contents
