Dell S5000 Deployment/Configuration Manual page 54

Dell Networking S5000: Deployment of a Converged Infrastructure with FCoE
If we look at the details of what's connected to port 4 of the fabric A Fibre Channel switch, we see the
WWPNs of both the Dell S5000 switch and the Dell QLogic CNA.
Figure 58: Output of the 'portshow 4' command on the fabric A FC switch
To see information on NPIV devices logged into the fabric, use the 'show npiv devices' command as
shown below. Note the FCoE MAC is '0e:fc:00:01:04:01' (the FCoE Map + FC_ID as expected).
54 Deployment of a Converged Infrastructure with FCoE
Deployment/Configuration Guide