Dell S5000 Deployment/Configuration Manual page 55

Dell Networking S5000: Deployment of a Converged Infrastructure with FCoE
Figure 59: Check NPIV devices logged into fabric A
To see currently active FIP-snooping sessions, use the 'show fip-snooping sessions' command.
Figure 60: See active FIP-snooping sessions on S5000 fabric A switch
To see FIP-snooping end-node information, use the 'show fip-snooping enode' command
Figure 61: See FIP-snooping enode information on S5000 fabric A switch
To see a list of configured fcoe-maps, use the 'show fcoe-map brief' command.
Figure 62: See list of configured fcoe-maps on S5000 fabric A switch
To see more detailed information on a given fcoe-map, use the 'show fcoe-map <FCoE_MAP_NAME>'
command. Notice below, we see the priority mapped to FCoE by default is '3'.
55 Deployment of a Converged Infrastructure with FCoE
Deployment/Configuration Guide