Dell S5000 Deployment/Configuration Manual page 51

Dell Networking S5000: Deployment of a Converged Infrastructure with FCoE
Figure 53: Output of the 'switchshow' command on the fabric A FC switch
The 'nsshow' command output below shows that both the Dell QLogic CNA port and Dell S5000
switch are logged into fabric A. Note here that the QLogic adapter WWPN is '20:01:00:0e:1e:0f:2d:8e'
and the Dell S5000 WWPN is '20:00:5c:f9:dd:ef:25:c0'. The four storage WWPNs are unchanged.
51 Deployment of a Converged Infrastructure with FCoE
Deployment/Configuration Guide