Installation And Operation - Ablerex RacPDU-115A User Manual

3.4.

Installation and Operation

The installation of the MTBS has three different methods. You may choose
one of them in accordance with your need. For installation procedure, please refer
to Figure 3.
Installation Procedure:
1. Unpack the package and keep the package for future use.
2. Check if any damage occurred during transportation. If yes, please contact
with your local agent.
3. Check to see if the input power cord/socket, UPS I/P & O/P cables, load
receptacle are complied with the ones you have in the UPS.
4. Shut down the load connected to the UPS and remove the input cable of the
load from the UPS, then turn off the UPS and remove the input power cord
of the UPS from the wall receptacle.
5. Hardware Installation
Rack Mount Installation
Fasten the Fixed Plate 1 as Figure 5 to the MTBS as shown in Figure 6.
6. Make sure the CAM Switch(Maintenance Bypass Switch) is at "Utility"
position, then plug the input power cord with "Utility" sign to the wall
receptacle, then the orange lamp of the MTBS will light up.
*Caution：The MTBS has already had electrical energy flowed through now.
7. Connect the input power cord of the UPS to the socket with a sign of
"CONNECT UPS LINE CORD HERE" of the MTBS.
*Caution：The UPS has already had electrical energy flowed through now.
8. Connect the plug with a sign of "TO UPS OUTPUT" of the MTBS to the
output socket of the UPS.
9. Please connect the load evenly to the sockets with a sign of "OUTPUT" of the
MTBS. The load is backed up by the Utility now.
10. Make sure the load connected is complied with the voltage and current of
the UPS.
11. Please turn on the UPS according to the operation manual of the UPS, then
the green lamp of the MTBS will light up.
8
Figure 5: Fixed Plate 1
Figure 6: Rack Mount Installation
9