Continuity Measurement - AEMC 511 User Manual

4.6
• Turn the rotary range switch to the
• Insert red test lead to the red "+" input jack and the
black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the sample
under test.
• If the resistance is less than 40Ω, the beeper emits a
continuous sound.
Clamp-on Meter Models 511 and 512
Shop for AEMC products online at:

Continuity Measurement

WARNING: When testing continuity, make
sure that there is no power in the tested
sample or circuit (dead circuit). This may be
checked by using the voltage functions.
WARNING: Immediately unclamp the meter
from the conductor under test if overload "
is displayed.
ShopAEMC
www.
range.
.com 1.888.610.7664
"
17