Dc Volt Measurement - AEMC 511 User Manual

4.4
• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and
the black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the test
points.
• If reading is unstable and is hard to read, push the
HOLD button and read the measurement.
Clamp-on Meter Models 511 and 512
Shop for AEMC products online at:

DC Volt Measurement

WARNING: Immediately unclamp the meter
from the conductor under test if overload "
is displayed.
ShopAEMC
www.
range.
.com 1.888.610.7664
"
15