Continuity Measurement - AEMC 565 User Manual

4.6 Continuity Measurement

• Turn the rotary range switch to the
• Insert red test lead to the red "+" input jack and the
black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the sample
under test.
• If the resistance is less than 40Ω, the beeper emits a
continuous sound.
1.800.561.8187
Clamp-on Meter Model 565
WARNING: When testing Continuity, make sure
that there is no power in the tested sample or
circuit (dead circuit). Also make sure the current
is fully discharged. This may be checked by
using the voltage functions.
Short circuit
with beep
www.
information@itm.com
.com
range.
Open circuit
no beep
21