Frequency Measurement - Current - AEMC 511 User Manual

4.9
NOTE: Remove the test leads before measuring current
• Turn the rotary range switch to the
• Press the lever to open the jaws.
• Clamp the jaws around the conductor to be mea-
sured.
20
Shop for AEMC products online at:
Frequency Measurement Using
Current Input
WARNING: Do not use both voltage and cur-
rent inputs at the same time when measuring
frequency. This may be dangerous. Errone-
ous readings will occur if both inputs are used
at the same time.
Clamp-on Meter Models 511 and 512
www.
ShopAEMC
range.
.com 1.888.610.7664