GE C60 Instruction Manual page 32
Breaker protection system
Hide thumbs
Also See for C60:
- Instruction manual (682 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (498 pages)
Table of Contents
Advertisement
SIGNAL PROCESSING
2
The UR samples its AC signals at 64 samples per cycle, that is, at 3840 Hz in 60 Hz systems, and 3200 Hz in 50 Hz systems.
The sampling rate is dynamically adjusted to the actual system frequency by an accurate and fast frequency tracking
system.
The analog/digital converter has the following ranges of AC signals:
Voltages:
Currents:
Current harmonics are estimated based on raw samples with the use of the full-cycle Fourier filter. Harmonics 2nd through
25th are estimated.
2-18
Figure 2-4: UR signal processing
C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 2: PRODUCT DESCRIPTION
Eq. 2-1
Eq. 2-2
Advertisement
Table of Contents
