Phasor Measurement Unit Records; Breaker Maintenance - GE C60 Instruction Manual

CHAPTER 6: ACTUAL VALUES
The represents the time at which the oldest available samples were taken. It is static until the log gets
OLDEST SAMPLE TIME
full, at which time it starts counting at the defined sampling rate.
The represents the time the most recent samples were taken. It counts up at the defined sampling
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS  CLEAR RECORDS

6.5.5 Phasor Measurement Unit records

ACTUAL VALUES  RECORDS  PMU RECORDS
 PMU
 RECORDS
The number of triggers applicable to the Phasor Measurement Unit recorder is indicated by the
The status of the phasor measurement unit recorder is indicated as follows.
ACTUAL VALUES  RECORDS  PMU RECORDS  PMU 1(2) RECORDING
 PMU 1
 RECORDINg

6.5.6 Breaker maintenance

ACTUAL VALUES  RECORDS  MAINTENANCE  BREAKER 1(4)
 BREAKER 1

C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL
NEWEST SAMPLE TIME:

2000/01/14 15:21:19
menu for clearing data logger records.
NUMBER OF TRIGGERS:

0
 PMU 1

 RECORDING
PMU 1 FORCE TRIGGER:

No
PMU 1 AVAILABLE

RECORDS: 0
PMU 1 SECONDS PER

RECORD: 0.0
PMU 1 LAST CLEARED:

2013/07/14 15:40:16
BKR 1 ACC ARCING AMP

φA: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP

φB: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP

φC: 0.00 kA2-cyc
BKR 1 OPERATING TIME

φA: 0 ms
BKR 1 OPERATING TIME

φB: 0 ms
BKR 1 OPERATING TIME

φC: 0 ms
BKR 1 OPERATING

TIME: 0 ms
BKR 1 ARCING AMP φA:

0.00 kA2-cyc
Range: 0 to 65535 in steps of 1
See below
NUMBER OF TRIGGERS
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: YYYY/MM/DD HH:MM:SS
RECORDS
value.
6
6-27