YASKAWA V1000 Installation Manual page 15

◆
LED Operator Display Overview
The LED operator located on the front of the protective enclosure is different than the LED
operator on the standard V1000 drive. Differences include:
• The "ALM", "REV", "DRV", and "FOUT" lights are below the data display area, not to
the right of the data display area.
• The "LO/RE" light is below the data display area and to the right, not on the LO/RE key.
• A STOP light is on the upper left of the STOP key.
LO/RE LED and RUN LED Indications on page 16
the V1000 NEMA Type 4X, IP66 LED operator compared to the standard V1000.
Refer to the drive Quick Start Guide for more details on the function of the LED Operator.
LED Operator
■
Figure 6
LED light
(5)
RUN LED
YASKAWA ELECTRIC TOBP C710606 35D YASKAWA AC Drive - V1000 NEMA Type 4X/IP66 Installation Manual
Figure 6 V1000 NEMA Type 4X, IP66 Drive LED Operator
describes the unique characteristics of
STOP LED
STOP
RUN
4 Components
LO/RE light
(LOCAL/REMOTE)
LO/RE lights when a run
command is selected from
the LED operator (LOCAL)
15