Receiving - YASKAWA V1000 Installation Manual

3 Receiving

3 Receiving
◆
Model Number and Nameplate Check
Please perform the following tasks after receiving the drive:
• Inspect the drive for damage.
If the drive appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate.
Figure 1 shows where the nameplate has been placed on the drive. Remove the front
cover and check the information listed on the nameplate.
Cover on page 31.
• If you have received the wrong model or the drive does not function properly, contact
your supplier.
Nameplate
■
Figure 1
AC drive model
Max applicable motor
Input specifications
Output specifications
Lot number
Serial number
10 YASKAWA ELECTRIC TOBP C710606 35D YASKAWA AC Drive - V1000 NEMA Type 4X/IP66 Installation Manual
CIMR-VUBA0001GAA
MAX APPLI.MOTOR:0.2kW/0.1kW REV:A
AC1PH 200-240V 50/60Hz2.0/1.4A
AC3PH 0-240V 0-400Hz 1.2A/0.8A
Mass 4.7
TYPE 4X INDOOR USE ONLY
Figure 1 Nameplate Information for Drives without Filter
Refer to Removing the Front
5080
IP 66
PASS
MADE IN JAPAN
Software version
Enclosure type