Chapter 8 : Lcd Display And Settings; Lcd Display Hierarchy - Delta HPH-60K User Manual

Chapter 8 : LCD Display and Settings

8.1

LCD Display Hierarchy

(Level 1)
PARALLEL SCREEN
(Level 3)
MEASURE
NOTE:
1. Please refer to 3.2 Control Panel for information about the LCD and function keys.
2. All information shown in the LCD diagrams presented in Chapter 8 : LCD Display and
Settings are for reference only. Actual readings depend on the operation of the UPS.
3. * Means that only service personnel can enable this function.
(Level 1)
MAIN SCREEN
(Level 2)
MAIN MENU
(Level 4)
MAINS
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
BYPASS
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
INVERTER
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
OUTPUT
VPHASE(V)/ VLINE(V)/ FREQ(Hz)
LOAD(%)/ KW/ KVA/ CURRENT(A)
BATTERY
VOLTAGE(V)/ CURRENT(A)/
*
CAPACITY(%)/ REMAIN TIME (MIN)
TEMPERATURE
AMB/ PFC/ INVERTER
DC BUS
BUS(+)/ BUS(-)
(Figure 8-1: LCD Display Hierarchy)
Chapter 8
(Level 1)
ALARM/ FAULT
INFORMATION
(Level 3)
MAINTENANCE
61
LCD Display and Settings
(Level 4)
MODEL NAME
SERIAL NUMBER
FIRMWARE VERSION
PFC/ INV & SYSTEM
STATISTICS
RUN TIME/ ON BAT COUNTS/
ON BYPASS COUNTS/
TOTAL OF EVENT LOG
EVENT LOG
EVENT CODE/ EVENT LOG
REAR TIME CLOCK
DATE(Y-M-D)/ TIME(H-M-S)
CONTROL & TEST
BATT TEST/ BEEP ENABLE/
COMMON BATT / SMB
LANGUAGE SETUP
LANGUAGE