Flow Simulation Diagnostic - Emerson Rosemount 8800D Series Safety Manual

Installation and commissioning
4.
5.
2.5

Flow simulation diagnostic

Performing an internal flow simulation ensures the current calibration state of the
transmitter by carrying out a verification of the electronics board stack to indicate the
health of the various components on the board stack. Failure may indicate a need to
replace the electronics. Every transmitter comes with internal flow simulation capabilities.
12
The location of the ALARM jumper depends upon whether or not the transmitter has
the (M5) optional display.
Figure 2-4: ALARM jumper location without (M5) optional display
Figure 2-5: ALARM jumper location with (M5) optional display
Replace the transmitter housing cover.
Power up the transmitter.
™
Rosemount 8800D Safety Manual