Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the fan on the palm-rest assembly.
2. Align the screw holes on the fan with the screw holes on the palm-rest assembly.
3. Replace the two screws (M2x5) that secure the fan to the system board.
4. Connect the fan cable to the system board.
Post-requisites
1. Follow the procedure from step 2 to step 8 in
2. Replace the keyboard.
3. Follow the procedure from step 4 to step 5 in
4. Replace the battery.
48
Replacing the fan
computer. After working inside your computer, follow the instructions in
"Replacing the base
cover".
"Replacing the optical
Replacing the fan
drive".
30
After
www.dell.com/
Advertisement
Table of Contents
