Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Route the display cable along the routing guides, starting from the bottom of the display (near the hinges).
2
Route the rest of the display cable along the routing guides on the left side of the display back-cover and antenna assembly.
3
Slide the camera cable into the connector on the camera module to secure the cable.
Identifier
Status
Post-requisites
1
Replace the
display
hinges.
2
Replace the
display
panel.
3
Replace the
display
bezel.
4
Replace the
display
assembly.
GUID-57172914-AB24-4DCE-BD70-0967C1E82776
Released
Replacing the display cable
computer. After working inside your computer, follow the instructions in
GUID-9DD6D749-47BB-452D-ACF9-E5E4BE938A8B
Released
GUID-989E88A1-A495-4EB8-8F21-AFB10E8B0B2C
Released
51
After working inside
www.dell.com/
Replacing the display cable
103